Packaging Film Specification Sheets: An RFQ Template

Meta description: A field-by-field template for film specification sheets: stretch, shrink and cling film, tape and strapping parameters, tolerances, and test methods for RFQs.

Buyers who evaluate film by sample alone inherit every quality dispute the sample never revealed: a roll that wraps beautifully in the trial and telescopes in the container, a tape that seals in the afternoon and lifts in the morning cold. The failure is not usually the supplier’s; it is the absence of a written specification that both parties can be held to.

A specification sheet converts a conversation into a contract. It tells the factory exactly what to make, tells your inspection team exactly what to check, and tells a replacement supplier exactly what to match if the first one fails. This guide provides a field-by-field template covering stretch film, shrink and cling film, packing tape and strapping, with the tolerances and test methods that make each field enforceable.

Why a Written Specification Beats a Sample

A sample answers one question: does this film work today, on this load, handled by these operators? A specification answers a different question: will every roll we receive for the next two years perform the same way? Importers who buy on samples and reorder on price learn the difference the first time a container arrives with rolls that neither telescope nor tear but simply stretch differently, because the resin blend or the winding tension changed without anyone being told.

The specification sheet also disciplines the RFQ itself. When every bidder quotes against identical fields, the comparison is honest, and the deviations a supplier declares become negotiating substance instead of fine print discovered after shipment.

The Core Fields Every Film Spec Sheet Shares

Regardless of product family, nine fields belong on every sheet. Fill them completely before sending the document to suppliers.

Field Example entry Why it matters
Product and construction PE stretch film, three-layer cast Construction drives performance; “PE film” alone does not
Width and tolerance 500 mm, ±3 mm Width drift changes overlap coverage on every pallet or carton
Thickness and tolerance 20 micron, ±5% Thickness is the main cost driver and the main performance variable
Core type and ID 50 mm cardboard core Wrong cores jam dispensers and machine chucks
Roll weight or length 15 kg net per roll Normalizes price comparison across suppliers
Winding and finish Wound glossy side out Orientation affects cling and unwinding behavior
Packaging 6 rolls per carton, 48 per pallet Affects container utilization and receiving labor
Labeling Roll label: spec, lot, date Makes traceability and claims possible
Food contact status Declaration required / not required Determines which documents must accompany shipment

Stretch Film Fields

Stretch film rewards precision because its whole job is mechanical. Specify these in addition to the core fields:

  • Cling: one-sided or two-sided, stated explicitly, since two-sided cling can bond adjacent rolls in storage.
  • Elongation at break and tensile strength, with test method stated (ASTM D882 is the usual reference).
  • Puncture and tear resistance, referenced to dart impact (ASTM D1709) and tear (ASTM D1922) where the load demands it.
  • Pre-stretch compatibility: the ratio your machine or dispenser runs, so the supplier matches residual elongation to it.
  • Color and opacity: clear, black, or tinted, with opacity stated for light-blocking requirements.
  • UV option where rolls or wrapped loads will stand outdoors.

If you are unsure which thickness to specify, our guide to stretch film thickness and width for export pallets walks through the selection by load type.

Shrink and Cling Film Fields

Shrink film is defined by its behavior under heat, so the sheet must carry the thermal numbers. Specify free shrink ratio in each direction, the sealing and shrinking temperature range, and the test standard used to measure shrink performance. For PE shrink hoods and bags, state the gusset and dimensions of the load they must fit, since a hood that is two centimeters short in one dimension is scrap. Where film touches retail multipacks, add gloss and haze if shelf appearance matters to the brand; retail bundling practice is covered in our guide to shrink film for retail multipacks.

Cling film for food service is defined by gauge, cling and food-contact status. Typical industrial specifications run 9 to 12 micron with widths from 300 to 600 millimeters depending on the workstation. State cling force with its test method, anti-fog performance where chilled display is involved, and require a food-contact declaration. Our overview of PE cling film for food packaging covers the application side; the declaration itself is a document to demand with every shipment, not a certificate framed once.

Tape and Strapping Fields

Tape specifications live and die on adhesion numbers. State total thickness (backing plus adhesive) in micron, the adhesive system, peel adhesion to steel in grams per 25 millimeters with its test method (ASTM D3330 is standard), holding power (ASTM D3654), tensile strength, elongation, width, core diameter and roll length. For carton sealing, add the substrate: standard kraft corrugated board behaves differently from recycled board, and the adhesive should be chosen against the board you actually use.

For PET strapping, specify width, thickness, minimum break strength, elongation at break, and joint efficiency for the sealing method you use, whether friction weld or seal; our PET strapping band pages list the standard sections for reference. State the coil length and core so winding equipment and dispenser stock match. If bales or pallets sit outdoors, add UV conditioning to the requirement.

Tolerances and Test Methods Turn Specs Into Contracts

A specification without tolerances is a wish. Every numeric field should carry a tolerance, and every performance property should carry a test method, so that a disputed roll can be tested by an agreed procedure on both sides of the ocean. The methods most frequently cited for PE films are tensile and elongation (ASTM D882), dart impact (ASTM D1709), tear resistance (ASTM D1922) and coefficient of friction (ASTM D1894); shrink performance is commonly checked against ASTM D2732 for free shrink. Tape carries peel (ASTM D3330) and holding power (ASTM D3654). State the sampling plan too: how many rolls per lot, how many specimens per roll, and what happens when one result fails.

Pair the tolerances with an acceptance rule. A common formulation: incoming inspection samples one roll per pallet, tests the properties marked “critical” on the sheet, and rejects the lot if any critical property falls outside tolerance. Without such a rule, tolerance lines on the sheet are decoration.

How Suppliers Should Respond to a Spec Sheet

Ask bidders to quote in a fixed format that mirrors your sheet: each field restated with their value, and a separate deviation table listing every field where their standard product differs, with the proposed alternative and its commercial impact. This structure takes suppliers an hour to complete and saves weeks of back-and-forth.

Then require a sample submission against the sheet, accompanied by a certificate of analysis reporting the same properties and methods. Evaluate the sample against the specification, not against the supplier’s brochure. When the trial succeeds, the sheet becomes the annex to the purchase contract, and future lots are inspected against it without renegotiation. For a broader view of the sourcing steps around the RFQ, see our guide to packaging film sourcing for global buyers.

Common RFQ Mistakes

  • Comparing price per roll across offers with different roll weights, so the cheapest quote is often not the cheapest film.
  • Leaving tolerances blank, which hands the supplier the right to drift within unmarked limits.
  • Omitting test methods, so laboratory results from buyer and supplier are not comparable.
  • Forgetting packaging, labeling and pallet configuration, which drives container fill and receiving labor.
  • Specifying “as per sample” as the only definition of quality, which cannot survive a personnel change at either company.
  • Evaluating one sample and awarding the contract, with no pilot lot or incoming-inspection rule to catch lot-to-lot variation.

Frequently Asked Questions

How detailed should tolerances be?

Tight enough to protect performance, loose enough to be manufacturable. ±5% on thickness and ±3 mm on width are common starting points for PE films.

Which properties are worth testing ourselves?

Thickness, width, and the one or two properties that decide success on your line, such as cling or peel adhesion. A thickness gauge and a spring scale cover most of it.

Can one spec sheet cover several products?

Use one sheet per product family, sharing the core fields and appending family-specific sections. Mixing stretch and tape on one sheet hides fields.

What if a supplier refuses to state tolerances?

Treat it as information. A supplier who will not commit to tolerances is asking you to absorb their variation.

Should the spec sheet mention food contact for industrial film?

State the requirement explicitly, even if the answer is “not required.” Silence later becomes an argument; a stated line settles it.

How often should we revise the sheet?

Review annually or whenever your wrapping machine, carton size or load profile changes. The sheet should follow the application, not the supplier.

Send Your Specification, Receive a Quotation That Matches It

Weishan Litong Packing Material Co., Ltd. manufactures PE stretch film, PE and POF shrink film, PE cling film, BOPP packing tape and PET strapping band as a factory-direct supplier, and we respond to specification sheets directly: each field quoted with its value, every deviation declared, and a certificate of analysis provided per production lot. Because we extrude and convert in-house, we customize width, thickness, roll weight, core size and printing to your sheet rather than asking you to accept a standard catalog. Send your completed specification sheet through our contact page, and we will return a quotation you can compare field by field.

Shopping Cart