Meta description: A buyer’s checklist: the four food-contact documents to collect for PE films, how FDA and EU rules differ, and how to verify a declaration before you order.
Food-contact compliance is the one part of a PE film purchase that cannot be inspected on the loading dock. Thickness can be measured with a micrometer, and film can be run on your wrapper before the balance is paid. A declaration of compliance is different: it is a sheet of paper, and the film behind it may or may not match what the paper describes.
That gap is where importers absorb risk. This guide sets out which documents to request for food-contact PE films, what each one proves, where US and EU requirements diverge, and how to test a supplier’s paperwork before the first container ships.
Why the Paper Trail Matters More Than the Data Sheet
A technical data sheet describes what a film can do. A compliance pack describes what a film is allowed to touch. Buyers negotiate hard on micron and yield while accepting whatever compliance file the supplier forwards, which is an odd allocation of attention: a gauge error costs a few percent of film consumption, while a mismatched declaration can stop a container at the border.
The exposure is largest for films that touch food directly, and for buyers whose customers audit them rather than the factory. A grocery chain buying cling film from a converter will ask that converter for the declaration, and the converter will ask you. A scanned document with no product name, no date and no resin reference ends the audit.
The Four Documents Buyers Should Collect
1. Declaration of Compliance
The core document. It states that a defined product, made from defined materials under defined conditions, meets the food-contact rules of a named market. A usable declaration names the film and its code, the legislation it is issued against, the food types and conditions covered, and carries a date and a signatory.
What it does not do is prove that the film in your container is the film described. That link comes from batch identification, which is why the declaration and the lot coding on the cartons must be read together.
2. Migration Test Report
Migration testing measures how much material transfers from the film into a food simulant under specified time and temperature conditions. For polyolefin films the useful results are overall migration and, where additives are present, specific migration of those additives.
Read the report for scope, not for a pass mark. A result on an aqueous simulant at 40 °C says nothing about a fatty food at 70 °C, and a result on 12 micron cling film does not extend to a 30 micron shrink film made from the same resin.
3. Resin and Additive Statement
A short statement naming the base polymer family, the additive package and whether recycled content is present. This is the document that most often exposes a mismatch: the declaration cites virgin film-grade resin while the price only works with reclaimed material.
4. Factory and GMP Statement
A description of hygiene and process controls at the producing plant: extrusion environment, line cleaning, foreign-body detection and traceability from resin lot to finished roll. It is a statement of practice, not a certificate, and it should name the site that extrudes the film.
FDA and EU Requirements Are Not Interchangeable
The two regimes ask different questions, so a file prepared for one market rarely satisfies the other without work.
In the United States, FDA 21 CFR 177.1520 addresses olefin polymers: which base polymers are permitted and the specifications they must meet. Compliance rests on the resin and the conditions of use, supported by the supplier’s own records rather than an approval number.
In the European Union, EU 10/2011 sets out permitted monomers and additives with specific migration limits, and expects a declaration of compliance to travel with the material at each stage of the chain. The EU model is document-driven in a way the US model is not: the declaration is a legal artifact, not a courtesy.
Practical consequence: if you sell into both markets, ask for two declarations, or one that names both legal bases and the conditions covered. Requirements may vary by application, market and applicable standard, and a supplier who cannot say which food types and temperatures a declaration covers has not finished the document.
Where Compliance Risk Concentrates by Product
| Product | Contact type | Document priority | Question for the supplier |
|---|---|---|---|
| PE cling film, manual rolls | Direct contact, fatty and acidic foods | Declaration plus migration report on a fatty simulant | Which food categories and temperature band does it cover? |
| Perforated cling film | Direct contact with fresh produce | Declaration plus resin statement | Do the perforations change the declared conditions of use? |
| PE shrink film for multipacks | Indirect contact, condensation present | Declaration with conditions of use stated | Is it valid at the tunnel temperatures actually used? |
| PE stretch film for pallet wrap | Indirect contact, outer layer only | Resin and additive statement | Are the tackifiers permitted in the destination market? |
The pattern is consistent: the closer the film sits to the food, and the more fat or heat is involved, the more of the pack you need. For pallet wrap, a resin statement is often enough; for cling film that touches cheese or cured meat, it is not.
How to Verify a Declaration of Compliance
- Check that the product named matches the purchase order, including gauge and width.
- Check the legal basis. A declaration citing no regulation, or one that does not govern plastics, is not a declaration.
- Check the conditions: food categories, maximum temperature, maximum duration.
- Check the date. An older declaration is valid only if the supplier confirms in writing that nothing changed.
- Cross-read it against the migration report: the tested article should be the same construction, not a generic sample.
- Compare signatory and address with the invoice and carton markings. Three entities on three documents is worth a question.
What Belongs in the Purchase Order
Compliance terms survive in a contract only if they are written into it.
- The market and legal basis the film must satisfy, named explicitly.
- The food types and use conditions the film is intended for.
- An obligation to supply the declaration with each shipment, not once at the start.
- Batch or lot identification on cartons that matches the declaration reference.
- A change-notification clause: any change to resin, additive or line requires written notice before shipment.
- A remedy for non-conforming documentation, separate from the remedy for non-conforming film.
Buyers new to importing film will find where this step sits relative to sampling and inspection in our guide to importing packaging film from China.
Five Documentation Failures That Surface Late
- One declaration reused across a catalog. A single document covering nine products is a template, not a technical statement.
- Declaration cites a resin the product does not use. Common where a film is downgauged after the file was prepared.
- Migration report on the wrong article. The sample was a laboratory plaque, not production film.
- Additives outside the permitted list. Slip agents and tackifiers are the usual culprits on film sold as food grade without a formulation review.
- No traceability between carton and declaration. Without lot coding, the paperwork cannot be tied to the goods in a dispute.
None of these are visible in a photograph of a roll. All of them are visible with a checklist and a request for the lot code.
Frequently Asked Questions
Is a food-grade certificate the same as a declaration of compliance?
No. A certificate attests that a system or product passed an audit on a given date. A declaration is a product-specific statement of conformity with named rules, describing the food types and conditions of use. Ask for the declaration and treat the certificate as supporting evidence.
Can the same PE film be sold as food grade and non-food grade?
Only if the line, resin and additive package are identical for both. Many plants run food-contact and industrial film on separate lines to avoid cross-contamination, which is one reason food-grade film carries a premium. If one price covers both, ask which line each is made on.
Does cling film need a different declaration from pallet stretch film?
Usually yes. Cling film touches food directly, often fatty food, and needs a declaration covering those conditions. Pallet film sits outside the primary pack and is generally covered by a resin statement, though the destination market still governs which additives are acceptable.
How long is a declaration of compliance valid?
Most markets set no fixed expiry. Validity depends on the formulation and on the legislation remaining unchanged. A practical rule is to require re-issue annually and after any change of resin, additive or production site, confirmed in writing.
What if the documents arrive after the container has shipped?
Hold the balance and request the file before the goods clear. Documents produced under time pressure at the destination are the weakest in the chain. If the file cannot be produced, treat the shipment as non-conforming rather than accepting a promise.
Can recycled content be used in food-contact PE film?
It depends on the market and the recycling stream. Rules differ on whether post-consumer material may contact food and under what conditions, and documentation requirements are stricter than for virgin resin. Requirements may vary by application, market and applicable standard.
Sourcing Food-Grade PE Film from Pefilmpack
Weishan Litong Packing Material Co., Ltd. produces PE stretch film, POF and PE shrink film, cling film, protective film, silage film, BOPP packing tape and PET strapping band for importers and distributors, with specifications open to customization on width, thickness, length, roll weight, color and core size. For food-contact applications we supply product-specific documentation with the shipment and keep batch identification on cartons, so paper and goods can be reconciled. We do not issue certificates we have not earned, and we will tell you which documents we can support for your market before you order.
Request a Quote — contact Pefilmpack with the product type, width and thickness, roll weight, intended food application and destination market.